The best pumps for wells 2020

Surface models are conventionally divided into sewer, circulation plants and pumping stations. We are interested in the latter category, due to higher performance and ease of use. Pumping stations maintain a well depth of up to 30 meters with a suction depth of around 7-10 meters. However, this class of equipment is the most expensive. If you plan to save money, sacrificing convenience, pay attention to the classic counterparts or submersible models with a more complex installation, presented below.

Opens the Top-10 pumps for wells model JILEX Jumbo 50/28 Ch-18. The station consists of a horizontal accumulator, the volume of which is 18 liters and, in fact, the pump itself. The productivity of the device is 3 cubic meters per hour with a pressure of 28 meters. The model is made of high quality cast iron and carbon steel. It is worth adding that the pump uses a pressure switch RDM-5, which allows the equipment to automatically turn on / off by pressure. This model is perfect for open ponds, surface installations for wells, wells. A good solution with reduced pressure in the pipeline.

If you are interested in a good automatic surface pump with a depth of 30 meters, we recommend that you pay attention to the station with the Aquario AUTO ADB-35 hydraulic tank. Despite the loyal value, the tank of this unit has brass spraying. Equipped with a single-phase, squirrel-cage induction motor. The power plant is 370 watts, and a capacity of 1800 liters per hour. The suction height is up to 7 meters, but optimally 5. The accumulator is designed for 24 liters. There is a set of automation, connected fittings. Judging by customer reviews, this device is convenient, it works stably, but it makes a lot of noise. The protection class complies with the IP 44 standard. However, the Italian manufacturer gives a 3-year warranty on its equipment.

Considering the segment of domestic pumping stations for wells, it is definitely worth paying attention to the model NS-600 / 34P from WWQ. We are talking about a durable surface pump, which can also be used in open water bodies, wells.In addition, this universal equipment is used for autonomous water supply of cottages and summer cottages. It can be used for watering the garden, the garden - a power of 600 W is enough. The maximum pressure of the electric pump is 34 meters. The maximum productivity at the same time reaches 3200 liters per hour. The permissible suction height is 9 liters, and the capacity of the accumulator is 24 liters. These are excellent features for a model whose weight is only 7.8 kilograms.

If a powerful surface pump is needed to organize uninterrupted water supply, pay attention to the VORTEX ASV-800/19 model. Productivity is enough for water supply of 60 liters a minute. The maximum head is designed for 40 meters, and the suction depth is 9 m. In the Whirlwind pump station segment, this unit has the best price-quality ratio. The only downside is that the case is made of plastic. The electric motor is asynchronous, equipped with a single-phase squirrel-cage rotor. The advantages of the device include the presence of thermal protection, automatic shutdown, special mounts and a built-in internal ejector.

The best surface pump for wells for 2020 - model APM-180. Refers to monoblock pumping stations with one impeller. Currently, such devices are used in water supply, heating, cooling and air conditioning systems. The gauge height is 7 meters with a maximum allowable pressure of 8 bar. With regard to design features, it should be noted the presence of high-quality engine protection. In particular, an advanced cooling system, squirrel-cage gearbox and starting capacitor are implemented. The power plant protection class is IP44. The stator is made of copper winding, the body material is cast iron.

This segment presents submersible models that are installed on the bottom of the well. Accordingly, such devices have higher power, performance, but provide for a difficult installation. When choosing a specific model, you should compare the following characteristics:

1. Power consumption;
2. Maximum pressure;
3. Throughput;
4. Immersion / suction depth;
5. Depth to a mirror of water.

Given the above parameters and the price / quality ratio, we have collected the most worthy models. Customer reviews are proof of this.

The VICHR SN-60V submersible model (60 meters), equipped with a durable stainless steel casing, replenishes the rating of pumps for wells. The pump part is made of chrome steel, it can pump water with mechanical impurities up to 40 g / m³. Productivity reaches 1500 liters per hour. The pressure is enough for a depth of up to 60 meters. Power consumption is 370 watts and a maximum output of 25 liters per minute. The maximum diving depth is 35 meters. Based on customer reviews, the device is stable, durable. It works even in harsh climatic conditions, is not afraid of even low temperatures.

The power of this model is 370 watts, productivity up to 1200 liters per hour. At the same time, a high-quality centrifugal submersible pump provides maximum immersion to a height of up to 15 meters. The length of the network cable is similar. It is worth adding that the maximum pressure can reach 73 meters. At the same time, the manufacturer took care of the availability of good filters. The maximum particle size can reach 1 millimeter.It should be said that the device has small dimensions (73 by 580 millimeters). The suction system is single-stage, but it copes with the tasks perfectly. At the same time, the Russian company offers an adequate price.

Undoubtedly, one of the best pumps for wells from 30 to 50 meters is the Jeelex Vodomet Prof 40/75 model, whose productivity is 2.4 cubic meters. Case diameter reaches 98 millimeters. Great solution for deep wells with little debit. Based on the statement of the developers, this device can pump water with sand content up to two kilograms per cubic meter of water. Also noteworthy is the high-quality built-in capacitor and a long power cord. A reliable thermal relay protects the power plant even in emergency mode. The unit is cooled by pumped water. In addition, drainage channels are responsible for the durability of the motor.

The Vortex SN-60 model (50 meters) is another reliable vortex type submersible pump, which is suitable not only for wells, but also for mine wells and open reservoirs. It can be used for watering gardens and gardens. Protection class complies with IPX8 standard. Provides installation to a height of 35 meters. At the same time, the distance from the bottom to the well should be at least 0.6 meters. The performance of this unit is 25 liters per minute with a power of 370 watts. The developer took care of reliable protection against dry running, the diameter is 75 millimeters. The casing is made of high quality stainless steel, the pump part of their chrome steel.

The best pump for wells in 2020 is the Aquarius BTsPE 0.5-50U model, designed to supply water from regular wells. That is, with an inner diameter of 110 millimeters or more. It can also be used for watering gardens. Each of the elements is made of high quality materials, including stainless steel, brass, thermoplastic and others. At the same time, environmentally friendly oil is used for work. It is worth adding that this submersible pump operates on the basis of a single-phase electric motor. The manufacturer made sure that the oil did not get into the pumped water. Inside is a durable thermal relay from the German company Thermik.

The first thing you need to pay attention to is the type of technique. According to the installation method, there are surface and submersible models. When thinking about how to choose a pump for a well, keep in mind that the first option is lowered down almost to the bottom. The second set using a float on the surface. They work on the principle of absorption, therefore they are relevant when it comes to the Abyssinian well. If you have a deep well, naturally, you need a submersible model.

Having decided on the type of equipment, it is necessary to pay due attention to the following parameters:

1. Pressure - the maximum height to which the pump can lift water at maximum pressure;
2. Productivity - the amount of water that a pump can supply from a well;
3. Maximum immersion depth - is selected taking into account the depth of the well and the static water level;
4. Suction system - there are single-stage and multi-stage. The second are distinguished by a large number of impellers and performance, respectively;
5. Maximum particle size - indicates the ability of the pump to withstand contaminated water.

Another important parameter is the approximate flow rate.It is important to understand that much more water will be needed in summer than in winter. Also, the daily rate depends on the number of plants in the country, animals. Experienced users for a garden or garden buy 4-inch casing. It is important to understand that surface pumps may not cope with such a load. In order not to make a mistake with the required power, look at the table. Do not forget that submersible models are quieter.

Finally, I want to add that the choice of such a technique provides for many nuances and often involves an individual approach. Be sure to require a technical passport from the performers to understand which pump to buy for the well. In the end, we suggest summarizing:

• best surface model - Aquario APM-180;
• submersible up to 30 meters - GILEX Vodomet PROF 40/75;
• submersible up to 50 meters - Aquarius BTsPE 0.5-50U.

Do not forget to share comments and reviews, because this is a delicate matter. Please note that the installation of such devices often requires more money than their purchase.