Overview of the Juicer Kitfort KT-1102

I received the goods in a rather bright and beautiful package. This was a pleasant surprise, since the experience of cooperation with the domestic manufacturer is significant, and I can say that Kitfort does not pay much attention to the design of the box. It’s good that this cannot be said about the new equipment. Opening the box, I found:

1. A bowl;
2. Filter holder;
3. Brush for cleaning;
4. Engine compartment;
5. Pulp container;
6. Juice container;
7. Screw;
8. Pusher;
9. Top cover;
10. Filter;
11. Manual;
12. Brand magnet;
13. Manual.

By the way, the manufacturer encourages customers to call the hotline if questions arise. From personal experience I can say that the support is really responsive and tolerant, so do not be shy to contact if something is not clear! However, I will try to reveal the main points in the review of the Kitfort KT-1102 juicer.

The engine compartment looks quite aesthetically pleasing and reliable. At the bottom there are four quality suction cups, so the juicer will not slide down the table during operation. On the front is the company logo, and on the back there is an on / off button and a power cord. As you already understood from the Kitfort KT-1102-2 review, I got a burgundy juicer, but there are others. For example, the model with the index 1102-1 is orange in color, and 1102-3 is silver. There is already a choice depends on the style of the kitchen.

The bowl is made of high quality plastic and has two tubes: juice comes out from one, and oilcake from the other.

Measuring scale containers and a top lid are also made of this material. I want to say that plastic does not fonit cheapness.

The top lid has a fairly large neck, so you can put even large segments of ingredients in the bowl, up to a whole tangerine or a small apple. Honestly, the pusher did not even have to use, but it will come in handy.

It was possible to assemble the device without using the instructions.First he took the bowl, installed it on the engine compartment, turning it a little to the right side to fix it. Next, a filter is placed inside the container.

On both parts there are red dots with which it is very simple to place elements parallel to each other. After this, the screw is installed, and on top of everything we put the top cover with a neck. It also has a designation for proper installation. Once again, turn the lid clockwise, fix and substitute the containers. In general, that’s all. The process takes about 1 minute.
In the review of the Kitfort KT-1102 screw juicer, I want to share my impressions of the washing of components. In most cases, it is possible to clear the containers of residual ingredients without chemicals. At the same time, the presence of a special brush with a hard pile for the filter was pleased. With its help, the process is carried out quickly and without hassle. The high-quality plastic auger is also easy to clean.

I used apples and tomatoes to evaluate the effectiveness of the screw juicer. That is, different products to get the most informative review of Kitfort KT-1102. The principle is always the same: we collect, turn on and only then place the pre-cut ingredients in the neck. I note right away that the process of squeezing the juice begins instantly. In this case, it is better to serve the products gradually. I deliberately cut fruits and vegetables into large pieces, and still I did not have a pusher, as they fell into the auger under their own weight.

It took less than 3 minutes to prepare 2 cups of freshly squeezed apple juice. Honestly, in the process it seemed to me that the juice came out thick. However, the cake was dry enough. As a result, the fresh turned out to be clean, without seeds. At the same time, the products did not get stuck in the neck, although I did not particularly bother with their preparation - I cut apples, and that’s it. If you buy a device for proper nutrition, you will certainly appreciate the fact that there is a measuring scale on the container for juice.

Test number 2: tomato juice

For me, this test was originally indicative of the fact, since far from all juicers do well in preparing tomato juice. Used tomatoes quite large, so they were previously cut into several parts. Small can be put in the neck of the whole. The juice turned out to be quite thick, like liquid tomato puree. At the same time, seeds and peel did not get into the liquid container. However, the cake was wet compared to apples. However, the result more than met expectations, so Kitfort was satisfied with the tests in the review of the screw juicer from Kitfort.

It turns out that the screw juicers can be quiet, and this is a confirmation of this. Whoever, whatever may say, but I was pleased with the attitude of the developers towards users: not only in terms of configuration, but also in terms of build quality, ease of use. Separate attention in the description of Kitfort KT-1102 deserves a spiral auger that captures any product. Further, the grinding of the ingredients between the ribs on the filter. The mass is pressed, and a sieve separates the juice from the cake. I can’t say that the waste is as dry as possible, but hardly any other screw juicer can squeeze 100% juice. In general, I am satisfied with the purchase.

Thus, the model has a good price / quality ratio. As for reliability and durability, time will tell here, but at first glance the design is reliable, there are no defects. The model copes with the tasks quickly, efficiently. Cake in most cases is dry, juice without seeds and the output retains the beneficial properties of products, vitamins.

The power of rotation of the shaft is enough to get juice even from wheat and nuts. This is an appropriate choice for athletes, families with children and ordinary users who like to indulge in fresh fresh ones.